DC-10 weighs only 15 kg and dehumidifies according to the Consorb-principle
The DC-10 dehumidifier is maintenance friendly, has a long lifetime and rust free chassis. DC-10 dehumidifies according to the Consorb principle which is good if there is a large difference in moisture content between process and regeneration air inlets.
Capacity: 0.6kg/h* / Dry air flow: 190m3/h
*Dehumidifying capacity at 20°C / 60%RH
Aquasorb basically functions as a Consorb but the wet air flow is condensed in an air-chilled condenser instead of being led out. Thanks to the common fan for dry air and cool air, all energy is accumulated in the dry air. Aquasorb has a high dry airflow, which improves the drying effect.
The Consorb principle is normally used at low regeneration temperatures, e.g. if you have surplus heat or when dehumidifying very damp air. The Consorb principle is also good when there is a large difference in moisture content between process and regeneration air inlets.
Like Recusorb R, Recusorb DR has heat recycling, but has a fan for both the dry airflow and the wet airflow. This makes installation simpler when you require overpressure in the room to be dehumidified. This principle is also suitable when you want to achieve very low dew points.
Recusorb R operates using integrated heat recycling. During the rotor’s regeneration (green), heat is absorbed, and then recycled in the “purge zone”, where incoming air is pre-heated and partly dehumidified. Energy consumption falls and the dry air becomes both drier and cooler compared to other sorption dehumidifiers.
